top of page

royaldiadem Group

Public·13 members

Official Motorola Moto G7 Play XT1952-2 (CHANNEL) Stock Rom


How to Download and Install Official Motorola Moto G7 Play XT1952-2 (CHANNEL) Stock Rom




The Motorola Moto G7 Play is a budget-friendly smartphone that offers a 5.7-inch HD+ display, a Snapdragon 632 processor, 2GB of RAM, 32GB of internal storage, a 13MP rear camera, an 8MP front camera, and a 3000mAh battery. The device runs on Android 9.0 Pie out of the box and can be upgraded to Android 10 via OTA updates.


However, if you want to restore your device to its original state, or if you want to fix any software issues, such as bootloop, lag, virus infection, or IMEI problems, you may need to flash the official stock firmware on your Moto G7 Play. The stock firmware is the official software that comes pre-installed on your device and contains all the features and optimizations from Motorola. Flashing the stock firmware will erase all your data and settings, so make sure you backup your important files before proceeding.


Download File: https://shurll.com/2w4giQ


In this article, we will show you how to download and install the official Motorola Moto G7 Play XT1952-2 (CHANNEL) stock rom on your device. This is the firmware version for the Moto G7 Play sold in some regions, such as Europe, Latin America, and Asia. You can check your device model number by going to Settings > About phone > Model number. If your device model number is XT1952-2, then you can follow this guide.


Requirements




  • A Windows PC or laptop.



  • A USB cable to connect your device to the PC.



  • The latest Motorola USB drivers installed on your PC. You can download them from [here].



  • The official Motorola Moto G7 Play XT1952-2 (CHANNEL) stock rom file. You can download it from [here].



  • The Motorola Fastboot tool. You can download it from [here].



Steps to Flash the Stock Firmware




  • Extract the downloaded stock rom file to a folder on your PC. You should see a file named "XT1952-2_CHANNEL_RETBR_10_QPYS30.52-22-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip". This is the stock firmware file that you need to flash.



  • Extract the downloaded fastboot tool to another folder on your PC. You should see a folder named "platform-tools" that contains several files, such as "adb.exe", "fastboot.exe", and "mfastboot.exe".



  • Copy the stock firmware file to the platform-tools folder.



  • Power off your Moto G7 Play and boot it into bootloader mode by pressing and holding the Volume Down and Power buttons together for a few seconds.



  • Connect your device to the PC using the USB cable.



  • Open a command prompt window on your PC and navigate to the platform-tools folder. You can do this by typing "cd" followed by the path of the folder, such as "cd C:\Users\YourName\Downloads\platform-tools".



  • Type the following command in the command prompt window and hit Enter: mfastboot getvar max-sparse-size. This will check the maximum sparse size of your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot oem fb_mode_set. This will set your device into flash mode.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash partition gpt.bin. This will flash the partition table on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash bootloader bootloader.img. This will flash the bootloader on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot reboot-bootloader. This will reboot your device into bootloader mode again.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash modem NON-HLOS.bin. This will flash the modem on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash fsg fsg.mbn. This will flash the fsg on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot erase modemst1. This will erase the modemst1 on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot erase modemst2. This will erase the modemst2 on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash bluetooth BTFM.bin. This will flash the bluetooth on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash dsp adspso.bin. This will flash the dsp on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash logo logo.bin. This will flash the logo on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash boot boot.img. This will flash the boot image on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash system system.img_sparsechunk.0. This will flash the first chunk of the system image on your device.



  • Repeat the above step for all the remaining chunks of the system image, such as mfastboot flash system system.img_sparsechunk.1, mfastboot flash system system.img_sparsechunk.2, and so on, until you have flashed all the chunks.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash vendor vendor.img_sparsechunk.0. This will flash the first chunk of the vendor image on your device.



  • Repeat the above step for all the remaining chunks of the vendor image, such as mfastboot flash vendor vendor.img_sparsechunk.1, mfastboot flash vendor vendor.img_sparsechunk.2, and so on, until you have flashed all the chunks.



  • Type the following command in the command prompt window and hit Enter: mfastboot flash oem oem.img. This will flash the oem image on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot erase carrier. This will erase the carrier on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot erase userdata. This will erase the userdata on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot erase DDR. This will erase the DDR on your device.



  • Type the following command in the command prompt window and hit Enter: mfastboot oem fb_mode_clear. This will clear your device from flash mode.



  • Type the following command in the command prompt window and hit Enter: fastboot reboot. This will reboot your device normally.



Congratulations! You have successfully flashed the official Motorola Moto G7 Play XT1952-2 (CHANNEL) stock rom on your device. You can now enjoy a fresh and stable software experience on your Moto G7 Play. If you have any questions or issues, feel free to leave a comment below.


References




  • : Motorola USB drivers download link.



  • : Motorola Moto G7 Play XT1952-2 (CHANNEL) stock rom download link.



  • : Motorola Fastboot tool download link.





  • About

    Welcome to the group! You can connect with other members, ge...

    bottom of page